Fujitsu Solaris PCI GigabitEthernet 3.0 Manuel d'utilisateur télécharger pdf (Page 51)

Chapter 3 Setting Configuration Information

ok boot /pci@1f,4000/FJSV,pgtb@5

9. Install the Solaris OS.

10. After Solaris OS installation, check whether the FUJITSU PCI GigabitEthernet

software has already been installed using the following command.

# pkginfo | grep FJSVgid

example) # pkginfo | grep FJSVgid

system FJSVgid Fujitsu Gigabit Interface Adapter

system FJSVgidx Fujitsu Gigabit Interface Adapter (64-bit)

If the software has not been installed, install the FUJITSU PCI GigabitEthernet

software from the CD-ROM that came with the adapter. Refer to the "

Installation Guide

FUJITSU PCI GigabitEthernet 3.0 Update1

" for more information about installation.

● When you install Solaris 2.6 OS via a network, please be sure to set the value of

the "local-mac-address?" parameter of a client system as "false".

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 114 115

Pas de commentaire

Fujitsu Solaris PCI GigabitEthernet 3.0 Manuel d'utilisateur Page 51