Fujitsu fi-4120C Manuel d'utilisateur

Operator's Guidefi-4120C Image ScannerP3PC-E007-02EN

ixTrademarksMicrosoft®, Windows® and Windows NT® are registered trademarks of Microsoft Corporation of the USA and other respective countries.ISIS® is

6.1 Consumable and Replacement Cycle736REPLACING CONSUMABLES When Consumables Cannot Be Replaced Immediately1) To disable display of this mess

746.2 Replacing the Pad ASY6.2 Replacing the Pad ASYThe following shows the procedure for replacing the Pad ASY.1.Remove any documents on the ADF pap

6.2 Replacing the Pad ASY756REPLACING CONSUMABLES3.Remove the Pad ASY.Press in the knobs on both ends of the Pad ASY, and pull the Pad ASY upwards an

766.2 Replacing the Pad ASY5. Press down on the center of the ADF to return it to its original position and lock the ADF button.6.Reset the pad count

6.2 Replacing the Pad ASY776REPLACING CONSUMABLES4) Double click the "fi-4120Cdj".5) Click the "Device Set" tab. The following pa

786.2 Replacing the Pad ASY•For Windows® 95 / Windows NT® 4.01) When turning on the power, check that the scanner and the personal computer are conne

6.2 Replacing the Pad ASY796REPLACING CONSUMABLES4) Click the "Pad Counter Reset" button. The following message is displayed.Click "Ye

806.3 Replacing the Pick Roller6.3 Replacing the Pick RollerThe following shows the procedure for replacing the Pick roller.1.Remove any documents on

6.3 Replacing the Pick Roller816REPLACING CONSUMABLES3.Open the ADF by pushing on the ADF button and turning the ADF cover to the front.Be careful, t

826.3 Replacing the Pick Roller4.Remove the Pick roller from a scanner.1) Grip the knobs on the sheet guide between you fingers, and lift up to remov

x PrefaceSafety PrecautionsThis manual describes important details for ensuring the safe and correct use of this product. Thoroughly read this manual

6.3 Replacing the Pick Roller836REPLACING CONSUMABLES3) Remove the Pick roller while lifting it up in the direction of the arrow.4) Remove the Pick r

846.3 Replacing the Pick Roller5.Attach the new Pick roller.Insert the new Pick roller aligning the protrusion on the axis with the groove in the Pic

6.3 Replacing the Pick Roller856REPLACING CONSUMABLES6.Attach the Pick roller to the scanner.The procedure to attach the Pick roller to the scanner i

866.3 Replacing the Pick Roller7.Press down on the center of the ADF to return it to its original position and lock the ADF button.8.Attach the ADF p

6.3 Replacing the Pick Roller876REPLACING CONSUMABLES9.Reset the pick counter.The following shows the procedure for resetting the pick counter.•For W

886.3 Replacing the Pick Roller4) Double click the "fi-4120Cdj".5) Click the "Device Set" tab. The following panel appears.After

6.3 Replacing the Pick Roller896REPLACING CONSUMABLES•For Windows® 95 / Windows NT® 4.01) When turning on the power, check that the scanner and the p

906.3 Replacing the Pick Roller4) Click the "Pick Counter Reset" button. The following message is displayed.Click "Yes".The Pick

7TROUBLESHOOTING917TROUBLESHOOTINGThis chapter describes how to remedy document jams, other trouble, items to check before contacting the agent where

927.1 Removing Jammed Documents7.1 Removing Jammed DocumentsIf a document jam occurs during scanning, follow the procedure below to remove the jammed

xiSymbols Used In This ManualThis manual uses the following symbols in explanations in addition to warning indications.This symbol alerts operators to

7.1 Removing Jammed Documents937TROUBLESHOOTING2.Open the ADF by pushing on the ADF button and turning the ADF cover to the front.3.Remove the jammed

947.1 Removing Jammed Documents4.Press down on the center of the ADF to return it to its original position and lock the ADF button.Make sure that the

7.2 Remedying Typical Troubles957TROUBLESHOOTING7.2 Remedying Typical TroublesThis section describes trouble that may occur during scanning and how t

967.2 Remedying Typical TroublesAre power cord and AC adapter correctly connected?YESYESCorrectly connect power cord.NOPress power button.Contact the

7.2 Remedying Typical Troubles977TROUBLESHOOTINGHas a long time passed since scanner was last used?YESScanner is in Power Save mode. Press any button

987.2 Remedying Typical TroublesNOLoad document correctly on ADF paper chute.Document loaded correctly on ADF paper chute?YESADF closed completely?YE

7.2 Remedying Typical Troubles997TROUBLESHOOTINGContinued from previous pageDoes the alarm state remain displayed even after the scanner has been tur

1007.2 Remedying Typical Troubles*) For details on how to clean dirty locations, see "Chapter5, DAILY CARE."YESNOSelect Halftoning or dithe

7.2 Remedying Typical Troubles1017TROUBLESHOOTING*) For details on how to clean dirty locations, see "Chapter5, DAILY CARE."NOClean dirty l

1027.2 Remedying Typical TroublesClean dirty locations.(*)YESDo not press down ADF or place heavy objects on ADF during scanning.NOYESTop cover of AD

xii Screen Examples In This ManualThe screen examples in this manual are subject to change without notice in the interest of product improvement.If t

7.2 Remedying Typical Troubles1037TROUBLESHOOTING*) For details on how to clean dirty locations, see "Chapter5, DAILY CARE."YESContact the

1047.2 Remedying Typical Troubles*) For details on how to clean Sheet guide(A white portion) and glass, see "5.2 Cleaning the ADF."NOYESCl

7.2 Remedying Typical Troubles1057TROUBLESHOOTINGYESNOScanner operation is normal.Contact the manufacturer’s authorized service center.Turn scanner O

1067.2 Remedying Typical TroublesUse document which is satisfying requirements.(*1)NOFill double-feed detection.(*2)NOYESDocument satisfies condition

7.2 Remedying Typical Troubles1077TROUBLESHOOTING*1) For details on requirements, see "8.2 Document Quality."*2) For details on double-feed

1087.2 Remedying Typical TroublesUse document which is satisfying requirements.(*1)NOYESDocument fanned before loading on ADF paper chute?NOFan docum

7.2 Remedying Typical Troubles1097TROUBLESHOOTING*1) For details on requirements, see "8.2 Document Quality."*2) For details on how to atta

1107.2 Remedying Typical Troubles*1) For details on requirements, see "8.2 Document Quality."*2) For details on how to clean the ADF, see &

7.2 Remedying Typical Troubles1117TROUBLESHOOTING*) For details on how to clean the rollers, see "5.2 Cleaning the ADF."Clean all of the ro

1127.2 Remedying Typical TroublesRight click the Scanner Control Center icon and select [Options] then adjust the scan scale.Is the Scanner Control C

xiiiSafety PrecautionsThe following describes important warnings described in this manual.Do not damage the AC cable.Use only specified AC cables and

7.2 Remedying Typical Troubles1137TROUBLESHOOTINGContact the manufacturer’s authorized service center.YESNODid you adjust the offset (Position to sta

1147.3 Items to check before contacting the agent where you bought the scanner7.3 Items to check before contacting the agent where you bought the sca

7.3 Items to check before contacting the agent where you boughtthe scanner1157TROUBLESHOOTING General DetailsItem findingsModel (Example) fi-4120C

1167.3 Items to check before contacting the agent where you bought the scanner Installation or PC connection issues problem at the time of

7.3 Items to check before contacting the agent where you boughtthe scanner1177TROUBLESHOOTING Imaging system trouble OtherItem findings

1187.4 Checking Labels on the Scanner7.4 Checking Labels on the ScannerThis section describes how to check the labels on the scanner. Position

7.4 Checking Labels on the Scanner1197TROUBLESHOOTINGLabel B (example): Indicates scanner conformity with various standards.

1207.4 Checking Labels on the Scanner

1218ADF AND PAPER SPECIFICATION8ADF AND PAPER SPECIFICATIONThis chapter describes the required document size and paper quality for ensuring correct op

1228.1 Document Size8.1 Document SizeThe following shows the size of documents that can be scanned on the ADF.(Unit : mm)Maximum MinimumA B A B216 (8

xiv Use this scanner only at the indicated power voltage. Do not connect to multiple-power strips.Wipe any dust from the power plug.Do not install in

8.2 Document Quality1238ADF AND PAPER SPECIFICATION8.2 Document QualityThis section describes the types and thicknesses of documents that can be load

1248.2 Document Quality PrecautionsThe following documents sometimes cannot be scanned successfully on the ADF. To prevent unexpected trouble, a f

8.2 Document Quality1258ADF AND PAPER SPECIFICATION•When scanning semi-transparent documents, set the density to light to avoid bleed through.•To pre

1268.2 Document QualityWhen using the ADF, the leading edge of all document sheets must be evenly aligned. Make sure that curling at the leading edge

8.3 Maximum Document Loading Capacity1278ADF AND PAPER SPECIFICATION8.3 Maximum Document Loading CapacityThe maximum number of sheets that can be loa

1288.4 Hole-punching Prohibited Areas8.4 Hole-punching Prohibited AreasWhen using the ADF, document trouble might occur if there are punched holes in

8.5 Double-feed Detection Conditions1298ADF AND PAPER SPECIFICATION8.5 Double-feed Detection ConditionsThere are three double-feed detection modes: d

1308.5 Double-feed Detection Conditions Detection by Document LengthSheets of the same length shall be set in the ADF at a time.•Document leng

8.5 Double-feed Detection Conditions1318ADF AND PAPER SPECIFICATION Detection by Document Thickness and LengthSheets of the same thickness and

1328.5 Double-feed Detection Conditions26mm10mm35mmFeeding directionNo punched holes allowedNo printing allowedCenter of paper

xvDo not use the scanner if you smell strange odor.Turn the scanner OFF if it is damaged.If you sense heat coming from devices or detect other malfunc

9SCANNER SPECIFICATION1339SCANNER SPECIFICATIONThis chapter lists the scanner specifications.9.1 Basic Specifications...

1349.1 Basic Specifications9.1 Basic Specifications1Scanner Type ADF(Automatic Document Feeder)-2Image sensor CCD x 2 Front / Back3Light source Incan

9.1 Basic Specifications1359SCANNER SPECIFICATION*1) For details, see "Chapter8, ADF AND PAPER SPECIFICATION."*2) The scanning speed is the

1369.2 Installation Specifications9.2 Installation SpecificationsThe following table shows specifications related to scanner installation.Item Specif

9.2 Installation Specifications1379SCANNER SPECIFICATIONItem SpecificationAmbi-ent con-ditionDevice sta-tusOperating Not operatingTe m p e r a -ture5

1389.3 External Dimensions9.3 External DimensionsThe following shows the external dimensions of the fi-4120C.(Unit : mm)301(11.9")168(6.6")

GL-1GLOSSARY OF TERMSA4 sizeA standard paper size. Paper size is 210 x 297 mm.A5 sizeA standard paper size. Paper size is 148 x 210 mm.A6 sizeA standa

GL-2BitThe smallest unit of information in computer memory. A bit is a sin-gle digit, either a 1 or a 0, in the binary numbering system. Eight bits eq

GL-3Equipment ErrorAn error that cannot be corrected by the operator. Call CE.Error diffusionHigh-quality halftone (pseudo-grayscale) image production

GL-4Halftone processingAny method used to reproduce a photograph which includes a shade as an image composed of dots, namely, a binary image. Ditherin

xvi Do not allow liquids to get inside the scanner.Do not insert or drop foreign metal objects in to the scanner.Do not scan wet document or document

GL-5IRASInitialization of the hardware.Landscape orientationA document is transported and read with the long side vertical to the moving direction.Let

GL-6Noise removalIsolated noise from an image appearing as black spots in white areas and voids in black areas is removed to improve image quality.Ope

GL-7Read operationRefers to the reading operation including Simplex reading and Duplex reading.RS-232C interfaceA type of serial interface. See Serial

GL-8

IN-1INDEXAAC adapter...3AC cable...3ADF button...5ADF Pa

IN-2GGrayscale level...135HHalftone Patterns...135Heat capacity...137IImage sensor...

IN-3Scanning area...134Scanning speed...134Stacker...5TTurning the power ON...28UUSB in

IN-4

•Copying of the contents of this manual in whole or in part and copying of the scanner application is forbidden under the copyright law.•The contents

xviiDo not touch the inside of the scanner unless necessary.Do not disassemble or modify the scanner. The inside of the scanner contains high-voltage

xviii The following describes important cautions described in this manual.Do not touch the AC cable with wet hands.Do not install the scanner on unst

iINTRODUCTIONThank you for buying the fi-4120C Duplex Color Scanner.The fi-4120C scanner is capable of scanning color images on both sides, and has th

xixDo not block the ventilation ports.Do not place heavy objects or climb on top of the scanner.Before moving the scanner, disconnect the power plug f

xx Protect the scanner from static electricity.Do not use aerosol sprays near the scanner.Avoid any contact when scanner is in use.Install the scanne

xxiDisconnect the power plug from the power outlet when the scanner is not used for a long period of time.Disconnect the power plug from the power out

xxii Fujitsu Group OfficesPlease send your comments on this manual or on Fujitsu products to the following addresses:FUJITSU COMPUTER PRODUCTS OF AME

xxiiiFUJITSU ITALIA S.p.A.Via Nazario Sauro, 3820099 Sesto San Giovanni (Milan), ItalyPhone: (39-02)26294-1Fax: (39-02)26294-201Website:http://www.fuj

xxiv FUJITSU SYSTEMS BUSINESS (THAILAND) LTD.12th Fl., Olympia Thai Tower, 444 Rachadapisek Road, Samsennok,Huay kwang, Bangkok 10320, ThailandPhone:

xxvCONTENTS1 PREPARING THE SCANNER ...11.1 Checking the Contents of the Scanner Package ... 21.2 Names and Functions of Parts ...

xxvi 6 REPLACING CONSUMABLES ...656.1 Consumable and Replacement Cycle ... 666.2 Replacing the Pad ASY ...

1PREPARING THE SCANNER11PREPARING THE SCANNERThis chapter describes how to prepare the scanner for use.1.1 Checking the Contents of the Scanner Packa

21.1 Checking the Contents of the Scanner Package1.1 Checking the Contents of the Scanner PackageWhen you unpack the scanner package, make sure that

ii About this manualHow This Manual Is OrganizedThis manual is organized as follows. An index is provided at the end of this manual.1 PREPARING THE

1.1 Checking the Contents of the Scanner Package31PREPARING THE SCANNERScanner and Accessories•Scanner•ADF paper chute•AC adapter•AC cable•USB interf

41.2 Names and Functions of Parts1.2 Names and Functions of PartsThis section describes the names of parts and their functions. Front(1) Automatic

1.2 Names and Functions of Parts51PREPARING THE SCANNERNo. Name Function1 ADF(Automatic document feeder)Automatically feeds documents into the scanne

61.2 Names and Functions of Parts Rear(10) DC inlet(9) USB Interface connector(8) SCSI Interface connector(7) SCSI ID switch

1.2 Names and Functions of Parts71PREPARING THE SCANNERNo. Name Function7 SCSI ID switch Sets the SCSI ID. (Set to "5" before the scanner i

81.2 Names and Functions of Parts Removable PartsThe following shows the parts that can be removed from the scanner.PAD ASYADF paper chutePick rol

1.3 Operator panel91PREPARING THE SCANNER1.3 Operator panelThe operator panel is located on the right side of the scanner. This panel comprises a Fun

101.3 Operator panel*) For information on detailed settings for the launcher, refer to the Scanner Utility for Microsoft® Windows® User’s Guide on th

1.3 Operator panel111PREPARING THE SCANNER Indications on the Function No. displayThe following shows the indications on the Function No. display.

121.3 Operator panel EIndicates that a device alarm occurred while the document was being scanned."E" and the alarm No. (2 to 9, c a

iii8 ADF AND PAPER SPECIFICATIONThis chapter describes the required document size and paper quality for ensuring correct operation of the ADF.9 SCAN

1.3 Operator panel131PREPARING THE SCANNERThe following table shows the details of each temporary error.The following shows the procedure for releasi

141.3 Operator panelThe following table shows the details of alarms.Indication MeaningE2 An trouble occurred on the optical system (front).E3 An trou

2INSTALLATION OF A SCANNER152INSTALLATION OF A SCANNERThis chapter describes how to install and connect the scanner, and how to install the scanner ap

162.1 Installing the Scanner2.1 Installing the ScannerThe following shows the procedure for installing the scanner.1.Place the scanner at its install

2.1 Installing the Scanner172INSTALLATION OF A SCANNER Attaching the ADF paper chuteThe following shows the procedure for attaching the ADF paper

182.1 Installing the Scanner Connecting the AC AdapterThe following shows the procedure for connecting the AC adapter.1.Connect the AC cable to th

2.2 Connecting the Scanner to a PC192INSTALLATION OF A SCANNER2.2 Connecting the Scanner to a PCWhen running Windows® 95 or Windows NT® 4.0, connect

202.2 Connecting the Scanner to a PC Connecting the USB Interface CableThe following shows the procedure for connecting the USB interface cable.1.

2.2 Connecting the Scanner to a PC212INSTALLATION OF A SCANNER4.Press the power button on the face plate of the PC to turn on the PC.•Be sure to use

222.2 Connecting the Scanner to a PC Connecting the SCSI Interface CableWhen using the scanner with SCSI interface, a third-party SCSI interface c

iv RevisionsFCC declarationThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of th

2.2 Connecting the Scanner to a PC232INSTALLATION OF A SCANNERThe following shows the procedure for connecting the SCSI interface cable.1. Insert the

242.2 Connecting the Scanner to a PC3.Press down the scanner power button on the Function No. display to turn on the scanner.4.Press the power button

2.2 Connecting the Scanner to a PC252INSTALLATION OF A SCANNER Setting the SCSI IDThe factory default setting for SCSI ID is "ID 5". The

262.3 Installing the Scanner Application2.3 Installing the Scanner ApplicationTo enable scanning of documents on the scanner, the Scanner driver (FUJ

3BASIC SCANNER OPERATIONS273BASIC SCANNER OPERATIONSThis chapter describes basic scanner operations.This chapter explains samples of the screens in Wi

283.1 Turning the Scanner ON3.1 Turning the Scanner ONThis section describes how to turn the scanner ON.The following shows the procedure for turning

3.1 Turning the Scanner ON293BASIC SCANNER OPERATIONS Power Save ModeThe Power Save mode keeps the scanner in a low-powered state after it has bee

303.2 Loading Documents on the ADF for Scanning3.2 Loading Documents on the ADF for ScanningThe following shows the procedure for loading documents o

3.2 Loading Documents on the ADF for Scanning313BASIC SCANNER OPERATIONS2.Fan the documentWhen loading a multiple-sheet document, fan the document as

323.2 Loading Documents on the ADF for Scanning3.Load the document on the ADF paper chute.Set the document so that the front side of the document (si

vThis Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conformme à la norme NMB-003 du Canada.Chang

3.2 Loading Documents on the ADF for Scanning333BASIC SCANNER OPERATIONS4.Move the side guides until they match the width of the document.Move the si

343.2 Loading Documents on the ADF for ScanningThe stacker prevents document sheets from dropping after they are scanned.Use the stacker as follows:1

3.2 Loading Documents on the ADF for Scanning353BASIC SCANNER OPERATIONS5.Start up the scanner application, and scan the document.For details on how

363.3 Scanning Documents3.3 Scanning DocumentsThe following shows the procedure for scanning documents with the ScandAll 21 scanner application (simp

3.3 Scanning Documents373BASIC SCANNER OPERATIONSThe [Select Source] dialog box appears.Select "FUJITSU fi-4120Cdj" (Windows® 95 and Window

383.3 Scanning Documents

3.3 Scanning Documents393BASIC SCANNER OPERATIONSThe document is scanned, and an image of the scanned document appears on the ScandAll 21 screen.For

403.3 Scanning Documents

4SCANNING VARIOUS TYPES OF DOCUMENTS414SCANNING VARIOUS TYPES OF DOCUMENTSThis chapter describes how to scan various types of documents.This chapter e

424.1 Scanning Different-width Documents4.1 Scanning Different-width DocumentsWhen scanning different-width documents together on the ADF, smaller-wi

vi Bescheimigung des Herstellers / ImporteursHiermit wird bescheinigt, daß der/dieldas•fi-4120C in Übereinsstimmung mit den Bestimmungen der•AmtsblVf

4.2 Saving Scanned Images in PDF Format434SCANNING VARIOUS TYPES OF DOCUMENTS4.2 Saving Scanned Images in PDF FormatTo save scanned images in PDF for

444.2 Saving Scanned Images in PDF Format3.Select [Import] - [Scan...] in that order from the [File] menu.The [Acrobat Scan Plug-in] dialog box appea

4.2 Saving Scanned Images in PDF Format454SCANNING VARIOUS TYPES OF DOCUMENTS4.Select "FUJITSU fi-4120Cdj"(Windows® 95 and WindowsNT® 4.0,

464.2 Saving Scanned Images in PDF Format5.Set the scan resolution, paper size and other scan conditions, and click the [Scan] button.Scanning starts

4.2 Saving Scanned Images in PDF Format474SCANNING VARIOUS TYPES OF DOCUMENTS6.To end scanning, click the [Done] button.The scanned image appears. Sa

484.3 Excluding a Color in the Image(dropout color)4.3 Excluding a Color in the Image(dropout color)A selected color information (primary colors: red

4.3 Excluding a Color in the Image(dropout color)494SCANNING VARIOUS TYPES OF DOCUMENTS1.Click the [Advance...] button in the [TWAIN Driver] dialog b

504.3 Excluding a Color in the Image(dropout color)3.For example, to scan only black text areas when scanning black text surrounded by a green frame,

4.4 Detecting Double-feeds514SCANNING VARIOUS TYPES OF DOCUMENTS4.4 Detecting Double-feeds"Double-feed" is a feeding error that occurs when

524.4 Detecting Double-feeds1.Click the [Option...] button in the [TWAIN Driver] dialog box.The [Option] dialog box appears.2.Click the [Option] tab.

viiInternational Energy Star ProgramAs a participating operator of the International Energy Star Program, PFU LIMITED. certifies that this product sat

4.4 Detecting Double-feeds534SCANNING VARIOUS TYPES OF DOCUMENTS3.Select the detection conditions from "Double Feed" under "ADF Option

544.4 Detecting Double-feedsCheck length : The scanner uses a sensor to monitor the length of documents that are fed. It detects a double-feed by cha

5DAILY CARE555DAILY CAREThis chapter describes how to clean the scanner.5.1 Cleaning Materials and Locations and Cleaning Cycle...

565.1 Cleaning Materials and Locations and Cleaning Cycle5.1 Cleaning Materials and Locations and Cleaning Cycle Cleaning MaterialsThe table belo

5.1 Cleaning Materials and Locations and Cleaning Cycle575DAILY CARE Cleaning CycleThe following table shows the standard cleaning cycle for each

585.2 Cleaning the ADF5.2 Cleaning the ADFAs a rule, clean the ADF every 1,000 scanned sheets. This, however, depends on the type of document you ar

5.2 Cleaning the ADF595DAILY CAREThe following shows the procedure for cleaning the ADF.1.Open the ADF by pushing on the ADF button and turning the

605.2 Cleaning the ADF2.Clean the following locations with a soft, dry cloth moistened with Cleaner F1.Pick roller (One pieces)Plastic rollers (Four

5.2 Cleaning the ADF615DAILY CARE•Pad ASYClean the Pad ASY (rubber surface) downwards (direction of arrow). When doing this, take care not to catch

625.2 Cleaning the ADF•Feed rollerFollow the procedure below while rotating the Feed rollers to clean the rollers.1) Open the ADF by pushing on the

viii About the use of mercuryScanner lamp includes mercury.Too avoid unexpected injury, read the followings carefully.Doing following actions may res

5.2 Cleaning the ADF635DAILY CARE•Sheet guide(Especially a white portion)Clean lightly.•GlassClean lightly.When white portion of the sheet guide or

645.2 Cleaning the ADF3.Press down on the center of the ADF to return it to its original position until the ADF button locks.After the ADF is return

6REPLACING CONSUMABLES656REPLACING CONSUMABLESThis chapter describes how to replace scanner consumables.This chapter explains samples of the screens i

666.1 Consumable and Replacement Cycle6.1 Consumable and Replacement CycleThe following table shows the specifications of consumables and their stand

6.1 Consumable and Replacement Cycle676REPLACING CONSUMABLES Standard Consumable Replacement CycleYou can learn when to replace consumables and th

686.1 Consumable and Replacement Cycle3.In the [Printer and Other Hardware] screen, double click the "Scanners and Cameras" icon.The [Scann

6.1 Consumable and Replacement Cycle696REPLACING CONSUMABLES4.Double click the "fi-4120Cdj".(Windows® 95 and WindowsNT® 4.0, select "F

706.1 Consumable and Replacement CycleThe [fi-4120Cdj Properties] dialog box appears.

6.1 Consumable and Replacement Cycle716REPLACING CONSUMABLES5.Click the "Device Set" tab.The following panel appears.You can confirm the fo

726.1 Consumable and Replacement CycleThe following message sometimes appears when the scanner is being used:Replace consumables when this message is