Fujitsu RX900 Manuel d'utilisateur télécharger pdf (Page 50)

100

101

50 Maintenance Manual RX900 S1

Basic procedures

Ê Insert the inner parts of the rails that are mounted on the server into the

protruding middle parts until the rails engage (2).

Ê Release the locking mechanism of both rails (3).

– Left side oft the server: Push upwards

– Right side of the server: Push downwards

Ê Lower the lifter platform and slide the server into the rack (4). Remove the

lifter.

V CAUTION

Do not use the front handles to raise the server as they are not designed

to bear the weight of the unit. The front handles are only to be used for

pushing the server into the rack or pulling it out of the rack.

Sliding the Server into the rack

Ê Slide the server into the rack.

Ê Fasten the server to the rack with the four knurled screws on the front panel

and the cage nuts, see (5) in figure 10.

Ê Route the cables as described in the Technical manual for the rack in

question.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 367 368

Commentaires sur ces manuels

Pas de commentaire

Fujitsu RX900 Manuel d'utilisateur Page 50

Commentaires sur ces manuels

Produits connexes et manuels pour Serveurs Fujitsu RX900