Fujitsu Image Scanner fi-5950 Manuel d'utilisateur télécharger pdf (Page 13)

4

Chapter2

INSTALLATION OF THE SCANNER

2.1 Installing the Scanner

1. Place the scanner at its installation site.

For details on the scanner's dimensions and

required installation space, refer to the fi-5950

Operator’s Guide, chapter "10. Scanner Specifi-

cations".

2. Connect the AC cable to the Power inlet of the

scanner and plug it into an outlet.

2.2 Connecting the Scanner to

Your PC

Connect either using the USB or SCSI interface.

■ Connecting the USB Interface

1. Connect the USB cable to the USB connector.

2. Connect the other end of the USB cable to

your PC.

3. Press the "I" side of the main power switch to

turn on the scanner.

ATTENTION

• The scanner weight is 50 kg (110 lb).

Make sure two persons are available

when moving the scanner.

• When carrying the scanner, only grip the

bottom side.

ATTENTION

Use only the power cable provided by the

manufacturer.

HINT

The Function Number Display and the LED

may flash for an instant when plugging the

AC cable into the outlet. This is not a mal-

function.

ATTENTION

This scanner is provided with two inter-

faces: Ultra SCSI and USB 2.0 /1.1. Con-

nect only one of the USB or SCSI cable.

ATTENTION

• Be sure to use the USB cable which

comes with this scanner. Correct opera-

tion with commercially available cables

is not guaranteed.

• When connecting to a USB hub, use the

first stage USB hub that is closest to the

computer. If you use the second or later

hub stages, the scanner may not oper-

ate correctly.

• If you connect the scanner with USB 2.0,

it is required that the USB port and Hub

are compliant with USB 2.0. The scan-

ning speed may slow down if it is con-

nected with USB1.1.

ONOFF

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 25 26

Commentaires sur ces manuels

Pas de commentaire