Fujitsu SPARC T5120 Manuel d'utilisateur télécharger pdf (Page 137)

Servicing Motherboard Components 111

PCIe and XAUI Card Reference for SPARC

Enterprise T5220 Servers

The following table shows the physical PCIe/XAUI slot locations on the SPARC

Enterprise T5220 server, as viewed from the rear of the system.

Use the following table to plan your PCIe/XAUI card configuration on SPARC

Enterprise T5220 server.

Note – The lower numbered PCIe/XAUI slots (Slots 0 - 2) should be occupied first.

PCIe or XAUI names in ILOM messages are displayed with the full FRU name, such

as /SYS/MB/RISER0/PCIE0.

* Slots 0 and 1 are shared PCIe/XAUI slots. You can only install one or the other type of card.

† Slots 0 and 1 are shared PCIe/XAUI slots. You can only install one or the other type of card.

TABLE:

FB-DIMM Configuration Installation Map (SPARC Enterprise T5220 Servers)

PCIe 3 PCIe 4 PCIe 5

PCIe 0/XAUI 0 PCIe 1/XAUI 1 PCIe 2

TABLE: PCIe and XAUI Support (SPARC Enterprise T5220 Servers)

Slot PCIe Controller Supported Device Types FRU Name

PCIe 0 or

XAUI 0

* Slots 0 and 1 are shared PCIe/XAUI slots. You can only install one or the other type of card.

1 x8 PCIe operating at x4

XAUI expansion card

/SYS/MB/RISER0/PCIE0

/SYS/MB/RISER0/XAUI0

PCIe 1 or

XAUI 1

†

† Slots 0 and 1 are shared PCIe/XAUI slots. You can only install one or the other type of card.

1 x8 PCIe operating at x4

XAUI expansion card

/SYS/MB/RISER1/PCIE1

/SYS/MB/RISER1/XAUI1

PCIe 2 0 x16 PCIe operating at x8 /SYS/MB/RISER2/PCIE2

PCIe 3 1 x8 PCIe operating at x4 /SYS/MB/RISER0/PCIE3

PCIe 4 1 x8 PCIe operating at x4 /SYS/MB/RISER1/PCIE4

PCIe 5 1 x8 PCIe operating at x8 /SYS/MB/RISER2/PCIE5

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 239 240

Pas de commentaire

Fujitsu SPARC T5120 Manuel d'utilisateur Page 137