Fujitsu IMAGE FI-5530C2 Manuel d'utilisateur télécharger pdf (Page 152)

136

ATTENTION

This scanner can scan ID cards through the Automatic Document Feeder

with the following precautions.

• Place one card at a time into the Auto Document Feeder.

• ID card feeding requires the card to be fed through the Auto Document

Feeder in portrait mode as in the following figure.

• Smooth cards should be placed face down in the Auto Document Feeder.

• The card to be scanned should be within the ISO7810 compliance, type

ID-1.

ISO7810-compliant, Type ID-1 card

Material: PVC (Poly vinyl chloride) or PVCA (Polyvinyl chloride acetate)

Dimensions: 3.4 inch (height) x 2.1 inch (width) / 86 mm x 54 mm

Thickness: 0.03 ± 0.003inch / 0.76 ± 0.08mm

• Embossed cards (on which a raised effect is created) cannot be scanned.

• Cards that are excessively rigid or less flexible may not feed smoothly

and excessive noise may occur.

• Cards should be clean from oil and without labels.

• Cards cannot be scanned when the imprinter is installed.

PORTRAIT

LANDSCAPE

1 2 ... 147 148 149 150 151 152 153 154 155 156 157 ... 178 179

Pas de commentaire

Fujitsu IMAGE FI-5530C2 Manuel d'utilisateur Page 152