Fujitsu IMAGE FI-5530C2 Manuel d'utilisateur télécharger pdf (Page 155)

6.5 Specifying How to Detect Multifeed

fi-5530C2 Image Scanner Operator’s Guide 139

DOCUMENT SPECIFICATIONS FOR ADF

6.5 Specifying How to Detect Multifeed

One of the following is selected to detect a multifeed:

• Check overlapping

• Check length

• Check overlapping and length

The following describes what condition is required for each selection:

■ Check overlapping

■ Check length

■ Check overlapping and length

Paper weight

52 g/m

- 127 g/m

(13.9 lb to 34.0 lb)

Punched holes are not allowed within

35 mm (1.4 in)

of the vertical centerline of the document.

Other paper shall not be glued within

35 mm (1.4 in)

of the vertical centerline of the document.

Document length deviation 1% or less

Punched holes are not allowed within

35 mm (1.4 in)

of the vertical centerline of the document.

Paper weight

52 g/m

- 127 g/m

(13.9 lb to 34.0 lb)

Document length deviation 1% or less

Punched holes are not allowed within

35 mm (1.4 in)

of the vertical centerline of the document.

Other paper shall not be glued within

35 mm (1.4 in)

of the vertical centerline of the document.

ATTENTION

Multifeed detection by overlap will often mis-detect very thick paper or

plastic document.

When scanning documents like this, please disable the multifeed

detection.

1 2 ... 150 151 152 153 154 155 156 157 158 159 160 ... 178 179

Pas de commentaire

Fujitsu IMAGE FI-5530C2 Manuel d'utilisateur Page 155