Fujitsu ScanSnap iX500 Manuel d'utilisateur télécharger pdf (Page 441)

100

101

Cleaning the Inside of the ScanSnap

441

Cleaning the Inside of the ScanSnap

Scanning continuously may cause dust and paper dust to accumulate inside the ScanSnap

and result in scanning error.

As a guideline, the inside of the ScanSnap should be cleaned every 1,000 sheets scanned.

Note that this guideline varies depending on the types of documents you scan. For instance,

it may be necessary to clean the scanner more frequently when you scan documents on

which the toner is not sufficiently fused.

z Before you perform cleaning, you must turn off the ScanSnap and unplug the cables to

avoid the risk of fire or electric shock.

z To avoid injuries, do not place internal parts of the scanner (e.g. break roller, pick roller)

anywhere within reach of small children.

z Do not use aerosol spray or spray that contains alcohol to clean the scanner. Paper dust

and other dust blown up by strong air from the spray may enter inside of the scanner

which may cause scanner failure or malfunction.

Also note that sparks generated by static electricity may cause a fire.

z The glass inside the scanner becomes very hot when the ScanSnap is being used.

Unplug the cables from the ScanSnap and wait for at least 15 minutes before cleaning.

HINT

Check the number of sheets scanned in the following procedure.

Select [Check consumable status] in the Right-Click Menu to display the [ScanSnap Manager - Check

consumable status] dialog box, and then see [Total Page Count].

Select [Check consumable status] in the ScanSnap Manager menu to display the [ScanSnap Manager -

Check consumable status] window, and then see [Total Page Count].

1 2 ... 436 437 438 439 440 441 442 443 444 445 446 ... 484 485

Commentaires sur ces manuels

Pas de commentaire

Fujitsu ScanSnap iX500 Manuel d'utilisateur Page 441

Commentaires sur ces manuels

Produits connexes et manuels pour Adaptateurs de transparence pour scanner Fujitsu ScanSnap iX500