Fujitsu PCI Gigabit Ethernet 4.1 Update 2/ 5.0 for Oracle Manuel d'utilisateur télécharger pdf (Page 26)

The parameter values need to be set by character strings like AutoNegotiation_A="On", LinkSpeed_A="100" and

DuplexCapabilities_A="Full".

The following is added to the fjgi.conf file:

AutoNegotiation_A="On"

LinkSpeed_A="100"

DuplexCapabilities_A="Full";

Example 3: The MTU parameter for all instances is set to 8000.

The parameter value needs to be set by numerical value like fjgi_mtu=8000.

The following is added to the fjgi.conf file:

fjgi_mtu=8000;

Note: After making changes to the fjgi.conf file, the system must be rebooted. The settings become effective after rebooting.

- How to set a parameter to each instance

Example 1: The parameters for fjgi0 is set to "Auto-Negotiation is disabled", "Connect at 100Mbps" and "Half-Duplex operation is

enabled".

The parameter value needs to be set by a character string like fjgi0="100:Half:::Off:::::".

The following is added to the fjgi.conf file:

fjgi0="100:Half:::Off:::::";

Example 2: The parameters for fjgi1 is set to "Auto-Negotiation is disabled", "Connect at 100Mbps" and "Half-Duplex operation is

enabled".

The parameter value needs to be set by a character string like fjgi1="100:Half:Auto:1500:Off:Auto::::".

The following is added to the fjgi.conf file:

fjgi1="100:Half:Auto:1500:Off:Auto::::";

Example 3: The parameters for fjgi0 is set to "Auto-Negotiation is enabled", "Connect at 100Mbps" and "Full-Duplex operation is

enabled".

The parameter value needs to be set by a character string like fjgi0="100:Full:::On:::::".

The following is added to the fjgi.conf file:

fjgi0="100:Full:::On:::::";

Example 4: The parameters for fjgi1 is set to "Auto-Negotiation is enabled", "Connect at 100Mbps" and "Full-Duplex operation is

enabled".

The parameter value needs to be set by a character string like fjgi1="100:Full:Auto:1500:On:Auto::::".

The following is added to the fjgi.conf file:

fjgi1="100:Full:Auto:1500:On:Auto::::";

Example 5: The MTU parameter for fjgi0 is set to 8000.

- 20 -

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 92 93

Pas de commentaire

Fujitsu PCI Gigabit Ethernet 4.1 Update 2/ 5.0 for Oracle Manuel d'utilisateur Page 26