Fujitsu PCI Gigabit Ethernet 4.1 Update 2/ 5.0 for Oracle Manuel d'utilisateur Page 35
- Page / 93
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
# ndd -set /dev/fjgi0 adv_1000fdx_cap 0
# ndd -set /dev/fjgi0 adv_1000hdx_cap 0
# ndd -set /dev/fjgi0 adv_autoneg_cap 0
# ndd -set /dev/fjgi0 adv_autoneg_cap 1
(Note) The last two commands above change the Auto-Negotiation setting, then change the
setting back. This causes the Link Status to change, and is required to make the settings
effective.
- When the setting change is reflected in hardware (an Auto-Negotiation value being subject to change):
ndd -set /dev/fjgi* param1 value (Change of setting 1)
ndd -set /dev/fjgi* param2 value (Change of setting 2)
: :
ndd -set /dev/fjgi* adv_autoneg_cap N (Let Auto-Negotiation have a different value from the
current value.)
(Note) Please put a decimal number (instance number) in place of the asterisk (*).
example: When changing fjgi0 into 100Full (autonego=0, link_sppd=100, link_mode=1) from a default state (autonego=1,
link_speed=1000, link_mode=1) while Auto-Negotiation had been disabled.
# ndd -set /dev/fjgi adv_1000fdx_cap 0
# ndd -set /dev/fjgi adv_1000hdx_cap 0
# ndd -set /dev/fjgi adv_autoneg_cap 0
(Note) The last command above changes the Auto-Negotiation setting. This causes the Link
Status to change, and is required to make the settings effective.
- The ndd(1M) Command Parameters
The following parameters can be used with the ndd(1M) command.
Parameters:
Parameter Status Meaning
? Read only Display parameter list
link_status Read only
0: Link down
1: Link up
link_speed Read only
10: 10Mbps
100: 100Mbps
1000: 1000Mbps
link_mode
Read only
0: Half Duplex
1: Full Duplex
autonego Read only
0: Auto-Negotiation is Off.
1: Auto-Negotiation is On.
flow_control Read only
0: None (flow_control disabled)
1: LocSend (Can transmit pause frame only)
2: Rem (Can receive pause frame only)
3: Sym (Can receive and transmit pause frame)
cardtype
Read only
0: SX (SE0X7GD2X)
1: T (SE0X7GD1X/SE0X7GQ1X/SE0X7GQ2X)
- 29 -
- User's Guide 1
- Revision History 3
- Contents 5
- Chapter 1 Product Outline 7
- 1.2.1 Specifications 8
- 2.3 Cable Connection 12
- 3.3 Environment Setting 18
- Information 19
- 3.5 Operation Mode Setup 23
- LinkSpeed_A="100" 25
- [Parameter Setting] 28
- 3.5.2 JumboFrame Setup 32
- 3.5.5 FCode Settings 41
- 3.6 Network Installation 43
- 3.7 VLAN Interface Setup 43
- 4.3 Notes 62
- Chapter 5 Troubleshooting 63
- Appendix A Messages 64
- ACT LED Description 71
- Cluster Environment 72
- Containers 73
- D.3 Notes 75
- - Solaris 10 8/07 or later 76
- - Solaris 11 76
- VM Server for SPARC 79
- E.3 Notes 81
- 11 Network Virtualization 82
- F.3 Notes 84
Produits connexes et manuels pour Matériel Fujitsu PCI Gigabit Ethernet 4.1 Update 2/ 5.0 for Oracle
Matériel Fujitsu MPD3XXXAT Manuel d'utilisateur
(191 pages)
(191 pages)
Matériel Fujitsu MBA3073NP Manuel d'utilisateur
(138 pages)
(138 pages)
Matériel Fujitsu MAP3735FC Manuel d'utilisateur
(114 pages)
(114 pages)
(202 pages)
Matériel Fujitsu MPC3065AH Manuel d'utilisateur
(185 pages)
(185 pages)
Matériel Fujitsu MHR2030AT Manuel d'utilisateur
(250 pages)
(250 pages)
Whirlpool AWT 4103 manuals
Owner’s manuals and user’s guides for Washing machines Whirlpool AWT 4103.
We providing 1 pdf manuals Whirlpool AWT 4103 for download free by document types: Troubleshooting Guide
Commentaires sur ces manuels