Fujitsu PCI Gigabit Ethernet 4.1 Update 2/ 5.0 for Oracle Manuel d'utilisateur télécharger pdf (Page 55)

passive: passive mode

off: off mode

-T time: Specify the LACP timer

short: every one second

long: every 30 seconds

aggr-link: The name of the representative interface.

- Description

Modifies a LinkAggregation Group.

- Exit Code

0: normal end.

>0: abnormal end.

- Example

Processes to modify the policy of a LinkAggregation Group are shown below.

- Solaris 10 8/07 or later

- The following example shows how to change the "key=1" LinkAggregation Group to "policy=L2":

# /usr/sbin/dladm modify-aggr -P L2 1

- Solaris 11

- The following example shows how to change the "aggr-link=aggr1" LinkAggregation Group to "policy=L2":

# /usr/sbin/dladm modify-aggr -P L2 aggr1

Processes to modify the LACP mode and LACP timer of a LinkAggregation Group are shown below.

- Solaris 10 8/07 or later

- The following example shows how to change the "key=1" LinkAggregation Group to "LACP mode=active, LACP timer=short":

# /usr/sbin/dladm modify-aggr -l active -T short 1

- Solaris 11

- The following example shows how to change the "aggr-link=aggr1" LinkAggregation Group to "LACP mode=active, LACP

timer=short":

# /usr/sbin/dladm modify-aggr -L active -T short aggr1

Note

- It is not necessary to use this command if the desired policies are L4 distribution, LACP mode off, and LACP timer 'short'.

LinkAggregation Groups are created with these default values.

- After rebooting the system, the LinkAggregation settings remain effective.

- For more information about this command, please refer to the "man pages section 1M: System Administration Commands" of Oracle

Documentation.

- 49 -

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 92 93

Pas de commentaire

Fujitsu PCI Gigabit Ethernet 4.1 Update 2/ 5.0 for Oracle Manuel d'utilisateur Page 55