Fujitsu 32-Bit Microcontroller MB9B500 Series Manuel d'utilisateur télécharger pdf (Page 11)

3.2 On-Board Programming via USB

 First check the hardware setting as introduced by section 2.4.

 After connect with PC via USB cable, the EVB can be identified as a USB device.

Figure 3-4: USB Device Sign

 Check the COM port for this USB port in the device manager.

Figure 3-5: COM Port in Device Manager

 Install the USB programmer: USBDW_V01L03. (It can be downloaded on the web)

 Open it, set the parameter as shown in following figure, and select Hex file.

Figure 3-6: USB Programmer Overview

 Click Full Operation.

Figure 3-7: Press Reset Button

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 33 34

Pas de commentaire

Fujitsu 32-Bit Microcontroller MB9B500 Series Manuel d'utilisateur Page 11